Jump to content

converting agd66 to wgs84 gps marks


Recommended Posts

Map Datum allows you to change the map coordinate system used by the 300 SeriesTMFishing System to match those of a paper map. The Map Datum menu choice is onlyavailable when User Mode is set to Advanced (see Setup Menu Tab: User Mode).To change the Map Datum setting:1. Make sure you are in Advanced User Mode, then highlight Map Datum on theNavigation main menu.2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Map Datumsetting. (Default = WGS 84)User Mode sets the menu system to either Normal orAdvanced. When set to Normal (default setting,) only the basic menu options areshown. When set to Advanced, additional menu choices are available.To change the User Mode setting:1. Highlight User Mode on the Setup menu.2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the User Modesetting. (Normal, Advanced, Default = Normal)

in case you don't have the manualhttp://www.retrevo.com/support/Humminbird-363-GPS-manual/id/540ci473/t/2/
Link to post
Share on other sites

converting position format can also be done straight on the gps. just switch to the format of the point you have, enter it, then switch back to the format you usually use.

Position Format selects the format of the latitude and longitude position display.This menu choice is available only when in Advanced User Mode (see Setup MenuTab: User Mode).To change the Position Format setting:1. Make sure you are in Advanced User Mode, then highlight Position Format onthe Setup menu.2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Position Format.(dd.ddddd°, dd°mm.mmm', or dd°mm'ss", Default = dd°mm.mmm')

Link to post
Share on other sites
  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...