Tenchy 0 Posted October 31, 2013 Report Share Posted October 31, 2013 Hi everyone,Does anyone have any images/demos for rigging standard white and red berley floats and those stick floats where you put the LED in at night time? I don't think it's as easy as threading the line through top and bottom holes. Can't find anything on web to help. Cheers Quote Link to post Share on other sites
Squid Flaps 5 Posted October 31, 2013 Report Share Posted October 31, 2013 II take a length of line, approx 1.5m maybe longer. One end i tie on the swivel then feed the line through the first hole till it snugs up against the pencil float then wrapping it around once and back through then down to the other hole feed through, wrap once around and back through again then tie on my hook. Mostly use a single hook rig to avoid tangles.I,ve gotta knock a rig up myself so 'ill take a pic if you need. Quote Link to post Share on other sites
Tenchy 0 Posted November 1, 2013 Author Report Share Posted November 1, 2013 Cheers Tackle Rat,That would be great. Quote Link to post Share on other sites
snapper15.4kg 67 Posted November 1, 2013 Report Share Posted November 1, 2013 To put a LED in, I would pass the line through two 1 cm pieces of plastic tube { about same size or a little smaller than the LED }You do this as you are making your rig up.At night, when you wish to use, just put the LED into the 2 tubes, one from each end of LED Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.