Lanes Hunter 39 Posted March 3, 2017 Report Share Posted March 3, 2017 Now that I am on the wrong side of 50, my good wife decided that the days of me hand winching the Northbank onto the trailer, were to come to an end, and bought me a electric winch for Xmas. Bonus! Better than hankies and socks. She got me a Powerwinch 712A which is made in the US and has about a 3400kg pulling capacity. Which is heaps to drag in the 500C. Then I just had to install it. Being Mr Tight A I wanted to do that myself and not pay someone to fit it. The post on the front of the trailer where the hand winch was - I had to measure a point on the post where the new winch would sit, and allow the cable to be level with the boat's draw ring in the bow. Then removed it and cut the top off the post nice and straight with a drop saw at that point and welded on a 6mm plate to the top. (I predrilled the plate to fit the winch mounting bolt holes). Then off to the galvanizers. $33 to get the whole post done. Came up a treat. There is a trick to preparing a closed tube for galvanising - you have to drill the end plates so that the liquid will get in - and flow out - whatever angle it is dipped. Look on the web for that. New marine grade stainless 10mm x 30mm bolts, nylocs and washers from Universal Fasteners at Wingfield. $10. The cable supplied with the winch wasn't going to be long enough to run under my 4WD. So I had to get 6m of 6mm twin core auto cable. Which I ran under the car using ribbed conduit as required + plenty of zippy ties. I then got 2 Narva Anderson plugs - put one onto the cars 7 pin socket mounting bracket at the rear. Nice and neat. The other I cut the supplied cable to the winch and put it on the end. The cable and plugs were $28.(You will need crimping pliers for the Anderson plug connections). Connecting to the battery / earth was pretty straight forward, and I used a 60A inline fuse to protect everything. No fuse, maybe one day your car burns to the ground. The winch peak draw is 90A - so I wouldn't go higher than 60A. If it blows, it blows. Better than a fire. Bit of stuffing around but it works great. Not sure how much the winch was as it was a gift $300? Plus another $80 of bits. Squid Inc., bjorn2fish, SaltyFlyer and 2 others 5 Quote Link to post Share on other sites
gregtech 1,029 Posted March 3, 2017 Report Share Posted March 3, 2017 Any pics to go with post LH ? Quote Link to post Share on other sites
projoe 261 Posted March 3, 2017 Report Share Posted March 3, 2017 You need to wire in a circuit breaker for that amount of amperage & do away with the fuse, properbly would have gone up a size on the cable as well & get a cover for the anderson plug on the rear of the car & the winch they do some cheap at JCAR. Quote Link to post Share on other sites
SaltyFlyer 298 Posted March 3, 2017 Report Share Posted March 3, 2017 Lanes Hunter Get yourself one of these, and wire it up under your bonnet near the battery... Blue Seas CCT Breaker Same style you get for electric anchor winches... Around $50 - $70 depending on where you buy it from Hope this helps SF ghostfisher, KIDNEY SLAPPER, projoe and 2 others 5 Quote Link to post Share on other sites
Lanes Hunter 39 Posted March 8, 2017 Author Report Share Posted March 8, 2017 Cool. That's the go. The Kluger is due to be traded in mid year. Will put one of those on the new Toyota. Over at Moonta on week end - will take a photo and post. Quote Link to post Share on other sites
Lanes Hunter 39 Posted March 21, 2017 Author Report Share Posted March 21, 2017 Hope this image loads ok. Photo attached. gregtech and bjorn2fish 2 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.