My Squid Rig

[MAH 449]

I've posted a couple of reports of local land based squid fishing and thought I'd give a run down of the rig I use.

So lets get the obvious out of the way, you don't need anything fancy to catch squid, and a handline with a jig will catch you squid. However, if you are land based fishing from popular metro spots, there are some upgrades that will increase your chances.

Rod

Number one item I would suggest is a long rod capable of flinging a jig a long distance. Every man and his dog will be covering the same area with their casts, but if you can cast further and search an area others can't reach, you might just hook into that big squid no one else has been able to tempt. My rod of choice is an 8'9" medium heavy Emeraldas. These are nice quality rods, good blanks, Fuji K guides and a good action for squidding. I've tried a 9' medium NS Black Water and a 8'3" medium light Atomic Arrowz egi rod. The Emeraldas has been the best all round in terms of quality materials, build quality and performance, however I feel the NS Black Water was a better rod in terms of performance (particularly for price), but the build quality lacked a bit (the rod joint was a little too lose). I wouldn't buy an Emeraldas if I was paying the local price of $250 for the entry level model and would opt for the NS Black Water instead. But I bought a rod built for the European market from OS for $165 landed.

Line

After the rod i think the next important part is the line. Again, I'm mainly interested in casting distance, so a quality 8 strand braid is the way to go. I'm using Platypus P8 0.14mm, Australian made and owned, and there is an Ebay seller who usually has it for a good price. When I bought it, the guy chucked in for free a small bottle of Line Butter line conditioner. For leader material I use 15lb Duel HD fluorocarbon. Ideally you would use a lighter mainline and leader for both better distance and sensitivity, but it's a trade off with strength for pull jigs out of snags.

Reel

The reel isn't too critical for squid fishing, it's basically just a winch for dragging in the squid. However you do want a reel that allows line to come off easily for long casts and also lays the line evenly on the spool when retrieving the line. It's hard to go past either Shimano or Daiwa. My reel is an Emeraldas LT 2500 double handle, not necessary, but I paid only $153 including shipping. The drag on the Emeralds is well suited to squid fishing, as it's nice and progressive, so you can easily dial in the drag for different jigs. When whipping the rod up to make the jig hop, ideally you want the drag set so gives a little so when you strike you don't lose the squid from ripping out the jig out or ripping off a tentacle.

Jigs

In my opinion, jigs are the least critical part of the set-up. You can spend a fortune on jigs, but I think it's more important to have a selection of reasonable quality jigs rather than just a couple of expensive jigs. Firstly you will definitely lose jigs to snags. Secondly, if you are not catching anything you might change your luck by changing your jig to a different color. Having several different coloured jigs should increase your chance of success when its slow (but you will also use the same jig 80% of the time and you only need a selection for the remaining 20% of time). I have lots of jigs (again bought cheap from OS or locally from Rui), different colours, different weight/sink rates). I've made a laminated cheat sheet for my tackle bag so I know which jig is which.

Terminal Tackle

Not critical. I like to use a quick change snap with a swivel so I can easily swap jigs. I'm currently using a snap swivel by Rui, but there are many other brands.

Occasionally I add chin sinkers if the current is strong and it's difficult to get the jig down deep. Strong wind can also make it difficult to get the jig down deep because it catches your line. You can use a small 00 ball sinker just above the snap swivel, but I'm currently using Nakajima sinkers which have a simple quick connect.

[imfishn 58]

Great information you have shared there MAH. Thank you 

[Rybak 627]

My favourite squid set up by far is  using a paternoster rig. Sinker on the bottom & squid jig on a quick change swivel above about 1m or so above the sinker. Sometimes I'll use 2 squid jigs on a 2m+ above the sinker if squid a thick & get double headers.    

[alfybabe 16]

Hi guys rybac I too use this method in deeper water and don't use sinker heavier than a 1 Oz I mainly use 1/2oz 

Cast allow sinker to hit bottom then wind slack up while at pause twitch your index finger holding your line a couple time to move your jig then pause for a second then 2 or 3 erratic jigs getting that jig darting allow sinker to bottom then wind slack and repeat deadly at rapid Bay ectin water under 15ft no need instead you can buy an attachment for your jigs that slow down your sink rate when in shallow water deadly as

Tight lines all