Jakdemo8 1 Posted June 3, 2014 Report Share Posted June 3, 2014 G'day guys, just wondering if any one has built their own rod from a rod building kit. I'd like to give it a shot, preferably a rod for flicking lures for sambos or a surf rod for mulloway. If any one could give me some good brands to try, tips on how to do it and what I'll need. Also is it something that requires more patience than the average joe or fairly straight forward. Thanks in advance Quote Link to post Share on other sites
Kelvin 2,200 Posted June 3, 2014 Report Share Posted June 3, 2014 Its getting harder and more expensive to get into rod building these days. Not long ago all tackle stores had a rod building section and it was easy to pick up blanks and supplies. These days off the self is almost the same price as building up a rod. I've built a few and am about to start on a Samurai NV8 with SIC guides for my father inlaw. A good start is to practice replacing and binding broken guides first. You can do it by hand but it is easier with some sort of roller. I got most of my gear from Rodworks or MOtackle. Samurai do rod kits and guide sets, but they are not cheap if you are only starting out. Otherwise buying overseas (mudhole) is cheaper but you need to factor in postage and know exactly what you want. Kilwel also do build your own rod kits that are much cheaper. pauly s 1 Quote Link to post Share on other sites
Jakdemo8 1 Posted June 3, 2014 Author Report Share Posted June 3, 2014 Thanks mate. I'll do some more research and mayb give it a crack. Roughly how much should I pay for a roller and would motackle stock something like this? Quote Link to post Share on other sites
Kelvin 2,200 Posted June 3, 2014 Report Share Posted June 3, 2014 http://www.therodworks.com.au/241-Drying-Rotisseries-and-Support-Rollers/5067-TRW-Binding-Rollers.html I use these but you can easily knock something up from wood and a couple of skateboard wheels or similar. I have even seen some made from a V cut in cardboard. Quote Link to post Share on other sites
Ale 301 Posted June 3, 2014 Report Share Posted June 3, 2014 I actually was contemplating having a shot, have the remains of a couple snapped rods to use as bits, just need to strip it all and see what I could make from it Quote Link to post Share on other sites
plastics punisher 42 Posted June 3, 2014 Report Share Posted June 3, 2014 I two am looking at building a rod something verstile enough to chuck slugs at salmon in the surf but also reef in a mully or kingie would be interested at seeing how you go and your progress it would obviously be a quite a task and an art getting the eyes straight Quote Link to post Share on other sites
Kelvin 2,200 Posted July 1, 2014 Report Share Posted July 1, 2014 Got my NV 8 blank and components separately and managed to get my SIC guides, grips, and reel seat for just over $100. Went with straight thick foam grips and a Fuji reel seat. Rod is for my father-in-law and will mainly be user for deepwater snapper with 20lb to 30lb and a big chunk of lead. Trimmed the tip and a bit off the butt to shorten the rod and change the action a bit. Blank came in at under 100g. Went with single foot guides at keep the weight down and with a Forhan locking wrap and a bit extra overbinding the single foot guides should be fine. Black thread on black as is my preferred style. Hand rolled in front of the TV and didn't take too long. Quote Link to post Share on other sites
Kelvin 2,200 Posted July 1, 2014 Report Share Posted July 1, 2014 SIC tip to go with the guides and it is ready to roll. Used The Rod Works Rotisserie and rollers Slow cure araldite and the first coat very light, just enough to wet the threads. Second coat on the next day thicker for strength and to smooth out any imperfections. Quote Link to post Share on other sites
Kelvin 2,200 Posted July 1, 2014 Report Share Posted July 1, 2014 I set up the guides similar to the Fuji new guide concept, transitioning down quickly from a size 30 stripper to size 16 then 10, several 7s and 8 tip. 7 guides + tip on a short rod to reduce friction as it bends a fair bit with heavy load. A bit unconventional but feels good and balances fine with my father-in-laws Penn slammer live liner 560 and 20lb braid. Total build came in at 220g. Can't wait to give it a test cast. Kuerschie 1 Quote Link to post Share on other sites
Kuerschie 2,309 Posted July 1, 2014 Report Share Posted July 1, 2014 Looks really nice Kelvin! Great work there and I hope we'll get to see a report of the first chance it gets to load up Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.