rocknev 2 Posted February 23, 2010 Report Share Posted February 23, 2010 well i bit the bullet, and tried to do some marbling. didnt use the correct epoxy , but rather araldite.reason being is, im not game enough to tackle my rod as yet, but im willing to have a go on my net... one thing with the araldite is, ITS BLOODY THICK STUFF.... but im pretty impressed with it so far.i will let it spin overnight to dry, then give it a clear coatof araldite again. its just a net, so im not that bothered if i stuff it up.. it will still do what i want it to do.bit more practice on some old rods might be the go before i tackle the snyderglas.pics uploading now. Quote Link to post Share on other sites
rocknev 2 Posted February 23, 2010 Author Report Share Posted February 23, 2010 Quote Link to post Share on other sites
penthrox 0 Posted February 23, 2010 Report Share Posted February 23, 2010 Looks bloody good mate!Ill put an order in for a camo rod Quote Link to post Share on other sites
ltfish 0 Posted February 24, 2010 Report Share Posted February 24, 2010 Top job for first effort Nev especially using araldite. Where do i order Quote Link to post Share on other sites
Dubs The Tackle Man 0 Posted February 24, 2010 Report Share Posted February 24, 2010 looks good Nev, real good for your first, keep us all posted.We use areldite on our rods and rod repairs does the job can be hard to use depending on the weather, will set faster in cooler conditions. Dubs Quote Link to post Share on other sites
Guest shagging Posted February 24, 2010 Report Share Posted February 24, 2010 For christ sakes nev keep your brother away from that sort of job! Quote Link to post Share on other sites
rocknev 2 Posted February 24, 2010 Author Report Share Posted February 24, 2010 its amasing how much it has changed from spinning over night.the coulrs have blended a bit more, but im pretty happy with it.bite to eat, then its on with a clear coat of araldite to finish and smooth it out.will do a bit more practice before the snyder gets a pull down, rethread, and some marbling done it.its a mustard colour, and im trying to think what colours will go with it.red could work, but yellow will get lost withe rod colour... maybe some blues or greens, but they dont really go with the red... Quote Link to post Share on other sites
Guest shagging Posted February 24, 2010 Report Share Posted February 24, 2010 rocknev wrote:its amasing how much it has changed from spinning over night.the coulrs have blended a bit more, but im pretty happy with it.bite to eat, then its on with a clear coat of araldite to finish and smooth it out.will do a bit more practice before the snyder gets a pull down, rethread, and some marbling done it.its a mustard colour, and im trying to think what colours will go with it.red could work, but yellow will get lost withe rod colour... maybe some blues or greens, but they dont really go with the red...this may sound silly but if you look at your picks of the rod you have done" i think a hot pink would look amazing in that colour scheme Quote Link to post Share on other sites
rocknev 2 Posted February 24, 2010 Author Report Share Posted February 24, 2010 shagging wrote: rocknev wrote: its amasing how much it has changed from spinning over night.the coulrs have blended a bit more, but im pretty happy with it.bite to eat, then its on with a clear coat of araldite to finish and smooth it out.will do a bit more practice before the snyder gets a pull down, rethread, and some marbling done it.its a mustard colour, and im trying to think what colours will go with it.red could work, but yellow will get lost withe rod colour... maybe some blues or greens, but they dont really go with the red...this may sound silly but if you look at your picks of the rod you have done" i think a hot pink would look amazing in that colour scheme actually, pink prob would suit that black one...hahaha, but its not a rod... its a landing net. Quote Link to post Share on other sites
Johnny Rotten 0 Posted February 24, 2010 Report Share Posted February 24, 2010 excuse my ignorance.......is it a cosmetic thing,or does it perform a function Quote Link to post Share on other sites
rocknev 2 Posted February 24, 2010 Author Report Share Posted February 24, 2010 bloody dog.... gave it a good thick coat to seal it today with araldite, then sprayed some clear ontop... brings the depth right out, then left it rotating and went out.come back an hr later and the bloody dog had got tangled in the extension lead, and pulled the plugout...thanksfully the net didnt end up on the floor, but no turning means the wet stuff has pooled and left drips on the bottom.. dammit. a new brush, some spray clear to soften the araldite, and all is good.i took it out in the sun yesterday, and the colours really come to life. Quote Link to post Share on other sites
Dubs The Tackle Man 0 Posted February 24, 2010 Report Share Posted February 24, 2010 oh spewing, hard to fix that but sounds like you got it under control. Quote Link to post Share on other sites
ltfish 0 Posted February 24, 2010 Report Share Posted February 24, 2010 rocknev wrote:bloody dog.... gave it a good thick coat to seal it today with araldite, then sprayed some clear ontop... brings the depth right out, then left it rotating and went out.come back an hr later and the bloody dog had got tangled in the extension lead, and pulled the plugout...thanksfully the net didnt end up on the floor, but no turning means the wet stuff has pooled and left drips on the bottom.. dammit. a new brush, some spray clear to soften the araldite, and all is good.i took it out in the sun yesterday, and the colours really come to life.Nev can also use hair dryer to help soften araldtie Quote Link to post Share on other sites
Guest shagging Posted February 24, 2010 Report Share Posted February 24, 2010 Johnny Rotten wrote:excuse my ignorance.......is it a cosmetic thing,or does it perform a function cosmetic Quote Link to post Share on other sites
rocknev 2 Posted February 25, 2010 Author Report Share Posted February 25, 2010 all good now... pics coming very soon Quote Link to post Share on other sites
rocknev 2 Posted February 25, 2010 Author Report Share Posted February 25, 2010 Johnny Rotten wrote:excuse my ignorance.......is it a cosmetic thing,or does it perform a function purley cosmetic... somthing to make my stuff individual...3 of my brothers have the same net, now i can tell mine apart hahahaha Quote Link to post Share on other sites
rocknev 2 Posted February 25, 2010 Author Report Share Posted February 25, 2010 sorry about the quality of the pics... it looks a lot better in direct sunlight... thats tomorrows pic. Quote Link to post Share on other sites
ltfish 0 Posted February 25, 2010 Report Share Posted February 25, 2010 Top job mate some off them look like fire Quote Link to post Share on other sites
rocknev 2 Posted February 25, 2010 Author Report Share Posted February 25, 2010 ltfish wrote:Top job mate some off them look like firethanks mate... i was trying to get the fire effect.. im pretty happy with it, it looks a lot better in the sunlight with natural light...now i will buy all the correct stuff, and maybe tackle the snyders i have Quote Link to post Share on other sites
rocknev 2 Posted February 25, 2010 Author Report Share Posted February 25, 2010 Dubs The Tackle Man wrote:looks good Nev, real good for your first, keep us all posted.We use areldite on our rods and rod repairs does the job can be hard to use depending on the weather, will set faster in cooler conditions. Dubsdubs, am i reading correct and you said you use it on rods? are you meaning the thread? if so . is it any good? the proper stuff aint cheap for what you get thats for sure.and does anybody sell the colour pigment close by? i might have to have a look around a rod building forum to ask a few questions. Quote Link to post Share on other sites
rocknev 2 Posted February 25, 2010 Author Report Share Posted February 25, 2010 couple more. Quote Link to post Share on other sites
Guest shagging Posted February 25, 2010 Report Share Posted February 25, 2010 nev that look's awesome mate i have a complete black rod that my grandfather passed on too me perhaps i might get his name put on it and try that sort of a design around the name! Quote Link to post Share on other sites
rocknev 2 Posted February 25, 2010 Author Report Share Posted February 25, 2010 shagging wrote:nev that look's awesome mate i have a complete black rod that my grandfather passed on too me perhaps i might get his name put on it and try that sort of a design around the name!it was pretty easy to be honest... just let your imagination run wild, i used a toothpic to drag the colour out of the dobs i put on there, but as it rotated through the night, it changed, as the glue shifted and cured.if you have a go, it might be a good idea to drag AWAY from your grandads name so if it shifts,too make sure it doesnt run into his name Quote Link to post Share on other sites
Guest shagging Posted February 25, 2010 Report Share Posted February 25, 2010 rocknev wrote: shagging wrote: nev that look's awesome mate i have a complete black rod that my grandfather passed on too me perhaps i might get his name put on it and try that sort of a design around the name!it was pretty easy to be honest... just let your imagination run wild, i used a toothpic to drag the colour out of the dobs i pu on there, but as it rotated through the night, it changed, as the glue shifted and cured.if you have a go, it might be a good idea to drag AWAY from your dads name so if it shifts, it doesnt run into his namethanks nev i will give that a go its my grandfather's name not my dad! lmao my old mans very much alive cheers mate Quote Link to post Share on other sites
advantage 0 Posted March 28, 2010 Report Share Posted March 28, 2010 Looks sweet. Just out of interested can anyone explains what required to do up a rod similar to the pics you've posted. I've got a Penn Sportfisher Rod that's chipped i'd love to have a go at fixing her up... My Fav Rod deserves a bit of a restoration... Quote Link to post Share on other sites
rocknev 2 Posted March 28, 2010 Author Report Share Posted March 28, 2010 advantage wrote:Looks sweet. Just out of interested can anyone explains what required to do up a rod similar to the pics you've posted. I've got a Penn Sportfisher Rod that's chipped i'd love to have a go at fixing her up... My Fav Rod deserves a bit of a restoration...gday matey... do you mean the marbling? or the rethreading im doing? if its the marlbing, this is the video i watched to learn... PRACTICE ON SOMETHING NOT OF GREAT VALUE is a bit of advice first.this is my landing net, and i used araldite for the epoxy rather than the proper stuff. the snyderglas im doing up will get some marbling done using the good stuff.for a bit of practice, i reckon an curtain rod from the hardware or spot spotlight store will do the trick...its pretty easy, and let your imagination run wild.hope this helps... Quote Link to post Share on other sites
Goldys_Fishin 0 Posted March 28, 2010 Report Share Posted March 28, 2010 That looks wild Nev. Cant wait to see it all finished. Quote Link to post Share on other sites
advantage 0 Posted March 28, 2010 Report Share Posted March 28, 2010 I will give it a go for sure. What's the best product to use to put a clear finish over top once you've done all the paint work etc? Quote Link to post Share on other sites
rocknev 2 Posted March 29, 2010 Author Report Share Posted March 29, 2010 advantage wrote:I will give it a go for sure. What's the best product to use to put a clear finish over top once you've done all the paint work etc? when it comes time to do the marbling on the snyderglas, i will be using jack erskins epoxy... designed for thread work.( just about any tackle shop should carry it)comes in 2 parts, and IMPORTANT to mix equal resin and hardener.lollipop stick to stir, and either after mixing, pour onto a flat surface( a bathroom tile is good,) or to stop bubbles when its brushed on, use a straw to gently blow any bubbles out ( but not sure if it will blow the paint around or not...thinking it would)i would be using the straw on a coat OVER the dried paint to get any bubbles out.its just somthing i want to do to make my rod mine.not sure how crazy i want to go, but the wooded butt and a section of the rod will be marblesd im thinking.AFTER its sealed with epoxy, the whole rod and artwork will be coated in a rod varnish... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.