FLOATMAN

Looking good Floatman - thanks for sharing
 
 

Good thoughts Floatman.
I've only used the light line for last 2 sessions ... one of Sullies rocks (so overhead casting) and second, out on a boat with lofty64 (mainly side casting or just dropping the float and letting the current take it).
Both O/head or side casting received the "odd" tangle.
I'm yet to get out on the jetty (this Monday hopefully) so see how it goes and will all be under arm casting.
 
Food for thought. 
However, having the indicator further down (past the length of the float), can also cause a tangle, so could cause more headache lol.
Hopefully a jetty session might be ok as that is the main place I use a float - fingers crossed.

Hi again DOOBIE,
As you say lighter line can cause tangles, with my floats if I DON'T keep the shot bunched under the float, instead of going out like a dart it will cartwheel, then you get the tangles. So you need the bits of that rig spaced as is, otherwise it won't work, maybe you will have to work on a different cast, something gentler, under arm cast or sideways or let the tide/flow take it away from the boat. I have caught lots of Gar but I'm not an expert by any means... like your set up, you've obviously put a lot of thought into that, I hope you can cure the problem?
Regards...

Looking at it again... maybe swap the burley cage to the base of the float and have the lighter cork ball down the line a bit,  once the burley has dispersed, the small ball will still be an initial indicator after disappearing for a few seconds, I think that will stop the tangles!

That makes sense Floatman and with different sizes and slightly different lightness in each float (weight), they can be used for a variety of fish I'm sure.
I have a different type of homemade float that uses some dowel (as a pencil float) and a champagne corked (carved to a small ball) that becomes an 'indicator'.  This best for Gar, as with any slight movement on the 'indicator' then you know the Gar are there - other fish (eg Tommies) will just take the floats under like any other float.
Although lately, after re-spooling the reel with lighter line, I am getting a few tangles - so got to sort that out  

 
Courteous of Google  

As a keen COARSE/FRESHWATER angler I find I can't get some of my prefered tackle in Australia so I have to buy it online from the UK or make it myself, so as promised I will share some of my favourites over time in this set of posts...
FLOATS... I am addicted to making floats, I love giving them away to people who fish like I do and HATE losing them. 
Most of my floats are wagglers, straight or bodied, as you can see from the photo they are all slightly different depending on what they are for, or where I am fishing, some can be used in saltwater for Gar and Tommies etc as well as in freshwater. The bodies are made from balsa wood which I turn on a small lathe, but you can also easily whittle then to shape with a sharp knife or stick them in a drill chuck, I always finish with fine sandpaper and fine wire wool. Carefully one end needs to be drilled to accept the stem, which I make from peacock quill or even better native reed stem (I always use the type of reeds that have the fluffy top and the stems are like mini bamboo, there's masses on most river banks (must be dry and brown not green) Always cut at a node so the tube is buoyant.   I superglue this into the balsa body. At the other end I glue in a short piece of bamboo skewer ready to have a safety pin eye whipped on and the whipping superglued.
To strengthen the main shaft, as you can see from the photo I do some decorative whipping nearly to the top, this does strengthen it considerably, we are now ready to  apply a base white top (cheapest way is to get some flat white acrylic paint, a sample pot from Bunnings is ideal) The florescent top is just a can of that Hi Vis stuff they spray on the road to mark where they are going to dig holes etc. I shake it well and spray some on a bit of paper or the like a use a small brush and paint over the flat white base down to almost the end of the white.. it dries very quickly!
Now all you need to do is varnish the whole thing, any varnish will do as they are not exposed to the weather much, I use a stain varnish (walnut) as this gives me an attractive brown effect.
As you can see all the floats are different, it's good to experiment and see what suits the type of fishing you want to do, they are so cheap to make and work much better than bought ones.
Hope you like that.... have a go, it's great to catch a fish on home crafted gear as I did today a 17+lb carp... any questions please don't hesitate to ask, and if you ever meet me on the bank please ask for a FREE float I will be only too willing to let you have one.

Hi DOOBIE
What you do is put a split shot either side of the ring to stop it sliding and set the depth (just touching bottom) and then load line with more split shot below ring to cock float so only the red is showing.... sounds complicated but when you've been doing it for as long as me it isn't... I have tried teaching non-float anglers and it takes a bit of time to twig-it.... but when you do, under the right circumstances, it will out fish most other methods. Hope that explains it a bit.... by the way where do you get your Fish and Chips , they look great!

As a keen COARSE/FRESHWATER angler I find I can't get some of my prefered tackle in Australia so I have to buy it online from the UK or make it myself, so as promised I will share some of my favourites over time in this set of posts...
FLOATS... I am addicted to making floats, I love giving them away to people who fish like I do and HATE losing them. 
Most of my floats are wagglers, straight or bodied, as you can see from the photo they are all slightly different depending on what they are for, or where I am fishing, some can be used in saltwater for Gar and Tommies etc as well as in freshwater. The bodies are made from balsa wood which I turn on a small lathe, but you can also easily whittle then to shape with a sharp knife or stick them in a drill chuck, I always finish with fine sandpaper and fine wire wool. Carefully one end needs to be drilled to accept the stem, which I make from peacock quill or even better native reed stem (I always use the type of reeds that have the fluffy top and the stems are like mini bamboo, there's masses on most river banks (must be dry and brown not green) Always cut at a node so the tube is buoyant.   I superglue this into the balsa body. At the other end I glue in a short piece of bamboo skewer ready to have a safety pin eye whipped on and the whipping superglued.
To strengthen the main shaft, as you can see from the photo I do some decorative whipping nearly to the top, this does strengthen it considerably, we are now ready to  apply a base white top (cheapest way is to get some flat white acrylic paint, a sample pot from Bunnings is ideal) The florescent top is just a can of that Hi Vis stuff they spray on the road to mark where they are going to dig holes etc. I shake it well and spray some on a bit of paper or the like a use a small brush and paint over the flat white base down to almost the end of the white.. it dries very quickly!
Now all you need to do is varnish the whole thing, any varnish will do as they are not exposed to the weather much, I use a stain varnish (walnut) as this gives me an attractive brown effect.
As you can see all the floats are different, it's good to experiment and see what suits the type of fishing you want to do, they are so cheap to make and work much better than bought ones.
Hope you like that.... have a go, it's great to catch a fish on home crafted gear as I did today a 17+lb carp... any questions please don't hesitate to ask, and if you ever meet me on the bank please ask for a FREE float I will be only too willing to let you have one.

As a keen COARSE/FRESHWATER angler I find I can't get some of my prefered tackle in Australia so I have to buy it online from the UK or make it myself, so as promised I will share some of my favourites over time in this set of posts...
FLOATS... I am addicted to making floats, I love giving them away to people who fish like I do and HATE losing them. 
Most of my floats are wagglers, straight or bodied, as you can see from the photo they are all slightly different depending on what they are for, or where I am fishing, some can be used in saltwater for Gar and Tommies etc as well as in freshwater. The bodies are made from balsa wood which I turn on a small lathe, but you can also easily whittle then to shape with a sharp knife or stick them in a drill chuck, I always finish with fine sandpaper and fine wire wool. Carefully one end needs to be drilled to accept the stem, which I make from peacock quill or even better native reed stem (I always use the type of reeds that have the fluffy top and the stems are like mini bamboo, there's masses on most river banks (must be dry and brown not green) Always cut at a node so the tube is buoyant.   I superglue this into the balsa body. At the other end I glue in a short piece of bamboo skewer ready to have a safety pin eye whipped on and the whipping superglued.
To strengthen the main shaft, as you can see from the photo I do some decorative whipping nearly to the top, this does strengthen it considerably, we are now ready to  apply a base white top (cheapest way is to get some flat white acrylic paint, a sample pot from Bunnings is ideal) The florescent top is just a can of that Hi Vis stuff they spray on the road to mark where they are going to dig holes etc. I shake it well and spray some on a bit of paper or the like a use a small brush and paint over the flat white base down to almost the end of the white.. it dries very quickly!
Now all you need to do is varnish the whole thing, any varnish will do as they are not exposed to the weather much, I use a stain varnish (walnut) as this gives me an attractive brown effect.
As you can see all the floats are different, it's good to experiment and see what suits the type of fishing you want to do, they are so cheap to make and work much better than bought ones.
Hope you like that.... have a go, it's great to catch a fish on home crafted gear as I did today a 17+lb carp... any questions please don't hesitate to ask, and if you ever meet me on the bank please ask for a FREE float I will be only too willing to let you have one.

As a keen COARSE/FRESHWATER angler I find I can't get some of my prefered tackle in Australia so I have to buy it online from the UK or make it myself, so as promised I will share some of my favourites over time in this set of posts...
FLOATS... I am addicted to making floats, I love giving them away to people who fish like I do and HATE losing them. 
Most of my floats are wagglers, straight or bodied, as you can see from the photo they are all slightly different depending on what they are for, or where I am fishing, some can be used in saltwater for Gar and Tommies etc as well as in freshwater. The bodies are made from balsa wood which I turn on a small lathe, but you can also easily whittle then to shape with a sharp knife or stick them in a drill chuck, I always finish with fine sandpaper and fine wire wool. Carefully one end needs to be drilled to accept the stem, which I make from peacock quill or even better native reed stem (I always use the type of reeds that have the fluffy top and the stems are like mini bamboo, there's masses on most river banks (must be dry and brown not green) Always cut at a node so the tube is buoyant.   I superglue this into the balsa body. At the other end I glue in a short piece of bamboo skewer ready to have a safety pin eye whipped on and the whipping superglued.
To strengthen the main shaft, as you can see from the photo I do some decorative whipping nearly to the top, this does strengthen it considerably, we are now ready to  apply a base white top (cheapest way is to get some flat white acrylic paint, a sample pot from Bunnings is ideal) The florescent top is just a can of that Hi Vis stuff they spray on the road to mark where they are going to dig holes etc. I shake it well and spray some on a bit of paper or the like a use a small brush and paint over the flat white base down to almost the end of the white.. it dries very quickly!
Now all you need to do is varnish the whole thing, any varnish will do as they are not exposed to the weather much, I use a stain varnish (walnut) as this gives me an attractive brown effect.
As you can see all the floats are different, it's good to experiment and see what suits the type of fishing you want to do, they are so cheap to make and work much better than bought ones.
Hope you like that.... have a go, it's great to catch a fish on home crafted gear as I did today a 17+lb carp... any questions please don't hesitate to ask, and if you ever meet me on the bank please ask for a FREE float I will be only too willing to let you have one.

As a keen COARSE/FRESHWATER angler I find I can't get some of my prefered tackle in Australia so I have to buy it online from the UK or make it myself, so as promised I will share some of my favourites over time in this set of posts...
FLOATS... I am addicted to making floats, I love giving them away to people who fish like I do and HATE losing them. 
Most of my floats are wagglers, straight or bodied, as you can see from the photo they are all slightly different depending on what they are for, or where I am fishing, some can be used in saltwater for Gar and Tommies etc as well as in freshwater. The bodies are made from balsa wood which I turn on a small lathe, but you can also easily whittle then to shape with a sharp knife or stick them in a drill chuck, I always finish with fine sandpaper and fine wire wool. Carefully one end needs to be drilled to accept the stem, which I make from peacock quill or even better native reed stem (I always use the type of reeds that have the fluffy top and the stems are like mini bamboo, there's masses on most river banks (must be dry and brown not green) Always cut at a node so the tube is buoyant.   I superglue this into the balsa body. At the other end I glue in a short piece of bamboo skewer ready to have a safety pin eye whipped on and the whipping superglued.
To strengthen the main shaft, as you can see from the photo I do some decorative whipping nearly to the top, this does strengthen it considerably, we are now ready to  apply a base white top (cheapest way is to get some flat white acrylic paint, a sample pot from Bunnings is ideal) The florescent top is just a can of that Hi Vis stuff they spray on the road to mark where they are going to dig holes etc. I shake it well and spray some on a bit of paper or the like a use a small brush and paint over the flat white base down to almost the end of the white.. it dries very quickly!
Now all you need to do is varnish the whole thing, any varnish will do as they are not exposed to the weather much, I use a stain varnish (walnut) as this gives me an attractive brown effect.
As you can see all the floats are different, it's good to experiment and see what suits the type of fishing you want to do, they are so cheap to make and work much better than bought ones.
Hope you like that.... have a go, it's great to catch a fish on home crafted gear as I did today a 17+lb carp... any questions please don't hesitate to ask, and if you ever meet me on the bank please ask for a FREE float I will be only too willing to let you have one.

As a keen COARSE/FRESHWATER angler I find I can't get some of my prefered tackle in Australia so I have to buy it online from the UK or make it myself, so as promised I will share some of my favourites over time in this set of posts...
FLOATS... I am addicted to making floats, I love giving them away to people who fish like I do and HATE losing them. 
Most of my floats are wagglers, straight or bodied, as you can see from the photo they are all slightly different depending on what they are for, or where I am fishing, some can be used in saltwater for Gar and Tommies etc as well as in freshwater. The bodies are made from balsa wood which I turn on a small lathe, but you can also easily whittle then to shape with a sharp knife or stick them in a drill chuck, I always finish with fine sandpaper and fine wire wool. Carefully one end needs to be drilled to accept the stem, which I make from peacock quill or even better native reed stem (I always use the type of reeds that have the fluffy top and the stems are like mini bamboo, there's masses on most river banks (must be dry and brown not green) Always cut at a node so the tube is buoyant.   I superglue this into the balsa body. At the other end I glue in a short piece of bamboo skewer ready to have a safety pin eye whipped on and the whipping superglued.
To strengthen the main shaft, as you can see from the photo I do some decorative whipping nearly to the top, this does strengthen it considerably, we are now ready to  apply a base white top (cheapest way is to get some flat white acrylic paint, a sample pot from Bunnings is ideal) The florescent top is just a can of that Hi Vis stuff they spray on the road to mark where they are going to dig holes etc. I shake it well and spray some on a bit of paper or the like a use a small brush and paint over the flat white base down to almost the end of the white.. it dries very quickly!
Now all you need to do is varnish the whole thing, any varnish will do as they are not exposed to the weather much, I use a stain varnish (walnut) as this gives me an attractive brown effect.
As you can see all the floats are different, it's good to experiment and see what suits the type of fishing you want to do, they are so cheap to make and work much better than bought ones.
Hope you like that.... have a go, it's great to catch a fish on home crafted gear as I did today a 17+lb carp... any questions please don't hesitate to ask, and if you ever meet me on the bank please ask for a FREE float I will be only too willing to let you have one.

As a keen COARSE/FRESHWATER angler I find I can't get some of my prefered tackle in Australia so I have to buy it online from the UK or make it myself, so as promised I will share some of my favourites over time in this set of posts...
FLOATS... I am addicted to making floats, I love giving them away to people who fish like I do and HATE losing them. 
Most of my floats are wagglers, straight or bodied, as you can see from the photo they are all slightly different depending on what they are for, or where I am fishing, some can be used in saltwater for Gar and Tommies etc as well as in freshwater. The bodies are made from balsa wood which I turn on a small lathe, but you can also easily whittle then to shape with a sharp knife or stick them in a drill chuck, I always finish with fine sandpaper and fine wire wool. Carefully one end needs to be drilled to accept the stem, which I make from peacock quill or even better native reed stem (I always use the type of reeds that have the fluffy top and the stems are like mini bamboo, there's masses on most river banks (must be dry and brown not green) Always cut at a node so the tube is buoyant.   I superglue this into the balsa body. At the other end I glue in a short piece of bamboo skewer ready to have a safety pin eye whipped on and the whipping superglued.
To strengthen the main shaft, as you can see from the photo I do some decorative whipping nearly to the top, this does strengthen it considerably, we are now ready to  apply a base white top (cheapest way is to get some flat white acrylic paint, a sample pot from Bunnings is ideal) The florescent top is just a can of that Hi Vis stuff they spray on the road to mark where they are going to dig holes etc. I shake it well and spray some on a bit of paper or the like a use a small brush and paint over the flat white base down to almost the end of the white.. it dries very quickly!
Now all you need to do is varnish the whole thing, any varnish will do as they are not exposed to the weather much, I use a stain varnish (walnut) as this gives me an attractive brown effect.
As you can see all the floats are different, it's good to experiment and see what suits the type of fishing you want to do, they are so cheap to make and work much better than bought ones.
Hope you like that.... have a go, it's great to catch a fish on home crafted gear as I did today a 17+lb carp... any questions please don't hesitate to ask, and if you ever meet me on the bank please ask for a FREE float I will be only too willing to let you have one.

As a keen COARSE/FRESHWATER angler I find I can't get some of my prefered tackle in Australia so I have to buy it online from the UK or make it myself, so as promised I will share some of my favourites over time in this set of posts...
FLOATS... I am addicted to making floats, I love giving them away to people who fish like I do and HATE losing them. 
Most of my floats are wagglers, straight or bodied, as you can see from the photo they are all slightly different depending on what they are for, or where I am fishing, some can be used in saltwater for Gar and Tommies etc as well as in freshwater. The bodies are made from balsa wood which I turn on a small lathe, but you can also easily whittle then to shape with a sharp knife or stick them in a drill chuck, I always finish with fine sandpaper and fine wire wool. Carefully one end needs to be drilled to accept the stem, which I make from peacock quill or even better native reed stem (I always use the type of reeds that have the fluffy top and the stems are like mini bamboo, there's masses on most river banks (must be dry and brown not green) Always cut at a node so the tube is buoyant.   I superglue this into the balsa body. At the other end I glue in a short piece of bamboo skewer ready to have a safety pin eye whipped on and the whipping superglued.
To strengthen the main shaft, as you can see from the photo I do some decorative whipping nearly to the top, this does strengthen it considerably, we are now ready to  apply a base white top (cheapest way is to get some flat white acrylic paint, a sample pot from Bunnings is ideal) The florescent top is just a can of that Hi Vis stuff they spray on the road to mark where they are going to dig holes etc. I shake it well and spray some on a bit of paper or the like a use a small brush and paint over the flat white base down to almost the end of the white.. it dries very quickly!
Now all you need to do is varnish the whole thing, any varnish will do as they are not exposed to the weather much, I use a stain varnish (walnut) as this gives me an attractive brown effect.
As you can see all the floats are different, it's good to experiment and see what suits the type of fishing you want to do, they are so cheap to make and work much better than bought ones.
Hope you like that.... have a go, it's great to catch a fish on home crafted gear as I did today a 17+lb carp... any questions please don't hesitate to ask, and if you ever meet me on the bank please ask for a FREE float I will be only too willing to let you have one.

As a keen COARSE/FRESHWATER angler I find I can't get some of my prefered tackle in Australia so I have to buy it online from the UK or make it myself, so as promised I will share some of my favourites over time in this set of posts...
FLOATS... I am addicted to making floats, I love giving them away to people who fish like I do and HATE losing them. 
Most of my floats are wagglers, straight or bodied, as you can see from the photo they are all slightly different depending on what they are for, or where I am fishing, some can be used in saltwater for Gar and Tommies etc as well as in freshwater. The bodies are made from balsa wood which I turn on a small lathe, but you can also easily whittle then to shape with a sharp knife or stick them in a drill chuck, I always finish with fine sandpaper and fine wire wool. Carefully one end needs to be drilled to accept the stem, which I make from peacock quill or even better native reed stem (I always use the type of reeds that have the fluffy top and the stems are like mini bamboo, there's masses on most river banks (must be dry and brown not green) Always cut at a node so the tube is buoyant.   I superglue this into the balsa body. At the other end I glue in a short piece of bamboo skewer ready to have a safety pin eye whipped on and the whipping superglued.
To strengthen the main shaft, as you can see from the photo I do some decorative whipping nearly to the top, this does strengthen it considerably, we are now ready to  apply a base white top (cheapest way is to get some flat white acrylic paint, a sample pot from Bunnings is ideal) The florescent top is just a can of that Hi Vis stuff they spray on the road to mark where they are going to dig holes etc. I shake it well and spray some on a bit of paper or the like a use a small brush and paint over the flat white base down to almost the end of the white.. it dries very quickly!
Now all you need to do is varnish the whole thing, any varnish will do as they are not exposed to the weather much, I use a stain varnish (walnut) as this gives me an attractive brown effect.
As you can see all the floats are different, it's good to experiment and see what suits the type of fishing you want to do, they are so cheap to make and work much better than bought ones.
Hope you like that.... have a go, it's great to catch a fish on home crafted gear as I did today a 17+lb carp... any questions please don't hesitate to ask, and if you ever meet me on the bank please ask for a FREE float I will be only too willing to let you have one.